I have a pi hole in my network and I set it as my primary DNS server, and my router (a Mikrotik) as secondary. DHCP sets the DNS servers as pihole, mikrotik
in this exact order and I want to keep it that way. I know systemd-resolved uses some algorithm to set the fastest dns as current server, but I don't want/need that. Is there some way to do configure it to just let it be?
I'm running Fedora 40.
I'm trying to move away from cron jobs, not that they don't work, but I want to get on with the times and also learn some things.
I created two user timers (and the associated services), one for backing up my data and the second to upload to B2. I'm using two scripts I had in my cron jobs for a few years and they worked without problems. But with systemd timers both scripts fail with exit code 15 (process terminated) and I have no idea why.
I run Debian 12 Bookworm.
Here's the output for the status of the upload service:
> systemctl --user status rclone-up.service
○ rclone-up.service - Run rclone up for b2
Loaded: loaded (/home/clmbmb/.config/systemd/user/rclone-up.service; disabled; preset: enabled)
Active: inactive (dead)
TriggeredBy: ● rclone-up.timer
Apr 11 06:10:39 tesla systemd[1698218]: Starting rclone-up.service - Run rclone up for b2...
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Main process exited, code=killed, status=15/TERM
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Failed with result 'signal'.
Apr 11 06:12:18 tesla systemd[1698218]: Stopped rclone-up.service - Run rclone up for b2.
Apr 11 06:12:18 tesla systemd[1698218]: rclone-up.service: Consumed 12.811s CPU time.
Also, here's the log created by rclone
while running:
2024/04/11 06:10:42 INFO : integrity.2376: Copied (new)
2024/04/11 06:10:43 INFO : hints.2376: Copied (new)
2024/04/11 06:10:43 INFO : nonce: Copied (replaced existing)
2024/04/11 06:10:47 INFO : config: Updated modification time in destination
2024/04/11 06:10:55 INFO : index.2376: Copied (new)
2024/04/11 06:11:40 INFO :
Transferred: 443.104 MiB / 2.361 GiB, 18%, 16.475 MiB/s, ETA 1m59s
Checks: 1503 / 1503, 100%
Transferred: 4 / 19, 21%
Elapsed time: 1m0.8s
Transferring:
* data/2/2328: 19% /502.259Mi, 2.904Mi/s, 2m19s
* data/2/2329: 52% /500.732Mi, 10.758Mi/s, 22s
* data/2/2330: 14% /501.598Mi, 3.150Mi/s, 2m15s
* data/2/2331: 0% /500.090Mi, 0/s, -
2024/04/11 06:12:18 INFO : Signal received: terminated
Where should I look to get some more information about what's going on? Why would the service be terminated like that?
LE:
Setting TimeoutSec=infinity
inside the [Service]
section of the unit file seems to help. Not 100% if it's a good idea, but I'll experiment with it.
So, at the moment I'm using Nginx Proxy Manager, but lately I started seeing it moving slower and slower and even though I tried traefik some time ago, I didn't manage to make it work.
Anyway, I want to start using traefik again, but I want to use it like this:
I know this is possible, but I don't get the hang of the configuration. Somone care to share some tips?
I've used wireguard for a pretty long time on my server and the phone as a client. I've had the same configuration for at least 4-5 years and never had issues. Last week I moved to using pihole in a container with a macvlan interface, so it has a different IP address than my physical server. Then I went and changed the DNS server IP on the wireguard config on the phone. When I reconnected I see I can't connect to any local IP address like I used to and I can't figure out why.
The local LAN is 10.11.12.0/24, the VPN is on 10.11.13.0/24.
Here's the server wireguard config:
[Interface]
Address = 10.11.13.1
ListenPort = 11194
PrivateKey = ...
PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o enp3s0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o enp3s0 -j MASQUERADE
[Peer]
# Galaxy S20+
PublicKey = U59JZqVbk2eFxTb7tteyu0WHlMTZsk68E7CF7v2AX2U=
AllowedIPs = 10.11.13.5/32
[Peer]
# narwhal - T480 job
PublicKey = Ja9OL13IoZA17GJq0/LbwizB9s2dRQLHHgW2C4TcFyY=
AllowedIPs = 10.11.13.7/32
And here's the phone's wireguard config:
Address = 10.11.13.5/24
DNS = 10.11.12.55
PrivateKey = ....
[Peer]
AllowedIPs = 10.11.0.0/16
Endpoint = my_dyndns_hostname:11194
PublicKey = 6aF1cJhH9oeQWr9LYOpH3wk+lN4k9/tSiAqV6LkUQ1Y=
I am able to connect and can ping 10.11.12.77, the IP address of the server, but nothing else. I have two RPis running as mpd servers and I used to be able to connect to them too, but not anymore. Their IP addresses are 10.11.12.105 and .106.
Also, before the dns change I was able (of course!) to use the local DNS I set up on the pihole, but now I'm not able to connect to the new DNS (.55) so I can't get any local address to resolve.
I'm looking for some hints on what I'm doing wrong. Please help.
Going to my account I can see all the comments I've made, but not the posts, even though there's the posts count showing the correct value.
https://www.techpowerup.com/312122/psa-intel-graphics-drivers-now-collect-telemetry-by-default
@clmbmb
@lemmy.dbzer0.com