Anyone playing TOTK on their Steamdeck?
I had a good run but ever since getting to the fire temple it's crashing every 5 minutes
I had a good run but ever since getting to the fire temple it's crashing every 5 minutes
If you're using Yuzu, change NVDEC emulation to CPU video decoding on the graphics tab and ASTC recompression to BC3 on the Adv. Graphics tab.
That's actually a misconception, though one that was often propagated so it stuck, unfortunately.
The Steam Deck will dynamically allocate video memory - way below 4GBs, or even larger than 4GBs, regardless of what you set as the UMA framebuffer setting. And it will change this allocation in real time, during each frame, as it monitors memory pressure.
The UMA buffer will indeed give a default "the GPU would like to report that 4GBs of memory are mapped to itself when the driver loads" but the CPU can (and will!) immediately ignore that as soon as needed.
Don't believe me? If you got 15 minutes to do a little experiment, try setting it at 256MB. 256MB for a device running modern games? No way! It won't get past the loading screen, right? Well, it will, and the performance will be quite literally identical to setting it at 4GB.
Addendum: some games give warnings of "Your system do not meet the minimum requirements of VRAM" when running on systems with APUs, in that particular case, setting a large UMA buffer will probably work to bypass the warning... But again, performance is similar.
Theoretically I agree with you, but I finally broke down and changed mine due to some instability and I haven’t had a problem since.
It’s completely possible that’s just placebo since my understanding of how it should work says you are right.
Oh, I'm not claiming you'll get any problems - you won't, don't worry, you can set it or leave it be without issues. You don't have to revert your setting, sorry if my comment gave that impression.
But it will not give you any benefits, really. It's like setting a different wallpaper - you can do it, it won't harm anything, but it won't actually improve games.
My understanding on the advantage for the VRAM change is that RAM gets priority over VRAM. If the systems needs more RAM, it will allocate the VRAM to RAM, and then reallocate back to VRAM, over and over. Increasing the minimum VRAM both keeps the VRAM from dropping below 4GB during high RAM demand and reduces the system swapping RAM between VRAM and RAM. That swapping back and forth can cause stuttering, which is the main thing the VRAM change is trying to fix.
I don't fault your logic, but unfortunately (and I really do mean unfortunately) that's not the case. The CPU gets absolute priority and can quickly take memory for itself.
Perhaps on other APU architectures that's not the case, I wouldn't know, but with the Steam Deck the CPU is always the maximum priority for memory allocation.
@kadu @Fubarberry FWIW the author of cryoutilities has done benchmarks and figured that increasing the default on the Deck does improve performance in some games slightly. He claims that introducing the swapfile also mitigates any potential disadvantages.
He did publish benchmarks, and he did isolate the VRAM change in at least one video I'm aware of... But he only showed very few games, with an improvement that's measured as less than 5% which is well within the margin of error.
Another YouTuber tried a round of CryoUtilities + 4GBs on over 20 games, and while he did get a 10% improvement in some (and we can't know which settings actually mattered as all of them were enabled) he also got a 10% decrease in others.
The point is though, none of this actually matters - because this setting can't possibly impact performance. It wasn't designed for this purpose, and the changes it does make can't affect how the APU will actually allocate memory. Do note that I'm talking about the 4GBs of VRAM thing though, messing with the swap file size and other similar things can indeed have a positive or negative impact on performance.
If you watch Cryo's specific game videos, he usually does a specific isolated 4GB VRAM tweak in every game. Often it does nothing, but sometimes it has a minor fps improvement or reduces stutter.
I've also seen other YouTubers run a list of games through cryoutilities (whole suite of changes, not just the VRAM tweak), and it definitely helps more than it hurts. Not huge gains, but it's free and relatively easy to do. Outside of a few games like RDR2 that have serious drawbacks it's usually worth it imo.
Yeah, most people set it larger for desktop mode or windows use, where the drivers don't auto allocate vram. Although as you said it seems many think it affects game mode which it doesn't.
Fire temple was the only place I was crashing on my PC. I just saved repeatedly until I made it through.
I've playing it on the deck by streaming. I get like 20fps if I run it on the deck. Is there a trick I missed to get to 30?
You'll need a mod to tweak the fps and physic engine to run at 30. There's a few out there, I'm using 30fps + Dynamic FPS from this github
It runs at 30fps on the real switch so that's what the physics engine expects.
I do use a dynamic fps mod on my desktop because I get 40-50fps. I'll try that one out though, the one I'm using doesn't handle prerendered cutscenes properly. Their speed doesn't scale with the framerate, so I'm looking for one that fixes that.
+1 for HolographicWing's TOTK-Mods.
They and bad1dea's NXCheats have been such a help - https://github.com/bad1dea/NXCheats
I've been playing on my Windows PC and Steam Deck (syncthing ftw) and so far so good, but I haven't gotten to that part yet. I'll try to remember to report back when I do.
The fire temple ran like ass for me also, but it was playable. Check out this guide, it may contain settings you didn't already tweaked yourself: https://lemmy.fmhy.ml/post/112584
I am getting decent frame rates but it just bricks up after a random period of time and crashes the whole deck on me. Your settings seemed to have improved it tho but still crashing
I find if it crashes it's almost always shaders. Usually it's been a few EA versions since I deleted them, after I do I have no problems.
Also the fire temple had by far the worst framerate and studder in the whole game for me
Is it worth trying to play this on the deck yet? I’ve been dragging my feet because I don’t really care much about making it run and better than it does on the switch; I just find the switch itself in handheld mode stupid uncomfortable and would mainly want to be able to play on the deck instead of switching between devices
been playing it via Yuzu EA builds. It runs just fine on the Deck at around 30fps, dipping to 20fps in some of the harder to render areas but it's certainly playable. I play on my gaming rig as well where it can easily keep a consistent 30fps.
If you don't care about making it run better than on the Switch, you're good. I did a little bit of hoop-jumping, following a guide that was on Reddit (and I don't know if it's currently visible) to get it running really well and also synchronize saves and mods to my PC.
I have not played TOTK on the Switch at all, I've exclusively experienced the game as a PC/Deck game and it's a damn good one. Sometimes I think "oh the emulator's chugging" when the game dips to 40FPS (PC) or 20FPS (Deck) while fiddling with the Ultra-Hand or bombs, but then I see my roommate do the same thing on an actual real Switch and it lags even more.
Do you have any recollection of the guide you used? I'd be curious to look around for it just in case it's not stuck inside the reddit void. So far I've had luck limiting the fps to 30 and setting the gpu clock to 1200 (granted, I am only in the first sky island area and haven't been anywhere near lava yet)
It was from /r/newyuzupiracy which actually got banned, it wasn't a blackout / protest thing. Unfortunately I don't have it cached but I can check my yuzu settings later for you.
EDIT: I found the one I used rehosted here. If you'd rather not click a link to Reddit, I'll put the post under a spoiler here but I'm not going to go through and correct any broken formatting (or remove Reddit links):
::: spoiler u/Maxlastbreath's TOTK yuzu guide Last Updated: 18th June 2023 - 19:58 UTC - THE CHANGELOG
Recommended Version(s) EA3589, EA3652.
If you are experiencing weird bugs check out the Bug Megathread TBA before commenting, there's also FAQ/Q&A at the bottom of the guide, including some common bugs.
This is the most up to date guide to get YUZU working with the latest available patches/mods & fixes. This guide will be updated daily (or weekly). if you are facing any problems you can check my other post Bug Megathread which is also up to date with this guide :). Feel free to ask anything, I've already answered close to 4000+ comments and counting on the original posts, that have been removed from reddit! :) If you are having trouble following the text, there's also a step by step Video Guide.
Wondering if you should upgrade to EA3602+ check this Performance Review.
Download these files:
Mod Folder Log up in my profile now, includes all versions.
user
folder, unzip/extract the contents of the Title & Prod Keys archive as well as the Mod Folder. (Your user folder should now contain a load
folder and keys
folder)Still can't setup yuzu? Follow through with Video Guide.
Every Setting Explained in a Video Format and It's Impact on performance or the game.
Steamdeck should run quite a lot better on EA3606+ with the above settings :).
TOTK Mod Collection Holographic Wings
Interpolated 60 fps Cutscenes V2 - Gone for now
u/ChucksFeedAndSeed - Shadow, resolution, Dynamic FPS mod
u/PixelKiri - Cutscene mod
Randomguy FPS Mod - 60 FPS Mod credit
u/MarethyuX - Blackscreen when switching weapons mod fix
theboy181 - Credit for cutscene fix
u/StevenssND - Auto Save Backup
Thank you u/Zel_La - BIG HELP WITH FORMATTING! <3
If you want to support my work, I have a kofi link at https://ko-fi.com/maxlastbreath :::
I just got the latest version of yuzu on emudeck last night and it seems to work fine but I only played for 10 mins. Have you installed the latest version of yuzu or ryujinx?