OpenWrt One - celebrazione dei 20 anni di OpenWrt

Open link in next tab

OpenWrt One - celebrating 20 years of OpenWrt

https://forum.openwrt.org/t/openwrt-one-celebrating-20-years-of-openwrt/183684

@blogic posted following on the OpenWrt mailing list for developers: tl;dr In 2024 the OpenWrt project turns 20 years! Let's celebrate this anniversary by launching our own first and fully upstream supported hardware design. If the community likes the idea outlined below in greater details, we would like to start formal vote. The idea It is not new. We first spoke about this during the OpenWrt Summits in 2017 and also 2018. It became clear start of December 2023 while tinkering with Banana...

OpenWrt One - celebrating 20 years of OpenWrt

Nel 2024 il progetto OpenWrt compie 20 anni! Festeggiamo questo anniversario lanciando il nostro primo progetto hardware completamente supportato.

Se alla comunità piace l'idea delineata qui in modo più dettagliato, vorremmo avviare una votazione formale.

...

Specifiche hardware:

  • SOC: MediaTek MT7981B
  • Wi-Fi: MediaTek MT7976C (2x2 2,4 GHz + 3x3/2x2 + zero-wait DFS 5Ghz)
  • DRAM: 1 GiB DDR4
  • Flash: 128 MiB SPI NAND+ 4 MiB SPI NOR
  • Ethernet: 2x RJ45 (2,5 GbE + 1 GbE)
  • USB (host): USB 2.0 (porta di tipo A)
  • USB (dispositivo, console): Holtek HT42B534-2 UART to USB (porta USB-C)
  • Archiviazione: M.2 2042 per SSD NVMe (PCIe gen 2 x1)
  • Pulsanti: 2x (reset + utente)
  • Interruttore meccanico: 1x per la selezione dell'avvio (ripristino, normale)
  • LED: 2x (pilotati da PWM), 2x Led ETH (pilotati da GPIO)
  • Watchdog hardware esterno: EM Microelectronic EM6324 (pilotato da GPIO)
  • RTC: NXP PCF8563TS (I2C) con batteria di backup (CR1220)
  • Alimentazione: USB-PD-12V su porta USB-C (opzionale802.3at/afPoE tramite modulo RT5040)
  • Slot di espansione: mikroBUS
  • Certificazione: Conformità FCC/EC/RoHS
  • Contenitore: Le dimensioni del PCB sono compatibili con il BPi-R4 e il design del case può essere riutilizzato
  • JTAG per il SOC principale: 10 pin a passo 1,27 mm (ARM JTAG/SWD)
  • Connettori antenna: 3x MMCX per facilitare l'uso, l'assemblaggio e la durata.
  • Schemi: saranno disponibili pubblicamente (licenza TBD)
  • Conformità alla GPL: 3b. "Accompagnare il prodotto con un'offerta scritta ... di fornire a qualsiasi terza parte ... una copia completa leggibile a macchina del codice sorgente corrispondente".
  • Prezzo: si punta a un prezzo inferiore a 100 dollari

...