I'm doing dactyl manuform first time (also my first ergo. keebs). Buying parts, soldering, wiring matrix like instruction. When i plugged in computer and flashing firmware, it only respond D, F, Space keys
I don't know why it doesn't work like it supposed to be, i have unpluged the pro micro, plugged and flash firmware again, and the problem is still there
Can someone see what wrong with my wiring?
I have read about some guides and in the progress doing the dactyl manuform, and I have seen that many people used some tape called "kapton tape" or used some shells pulled out from the wire to seperate the columns and rows of the matrix.
I want to know that is it safe to use the electrical tape for this purpose because I have read some comments said that the electrical tape will melt and cause everything around it sticky.
https://imgur.com/xIpeZVU%20https://imgur.com/I9QJUrc
I have do some research about doing dactyl manuform, and I see people mostly solder directly diodes and copper wire to the switch. So i want to know that if i build dactyl manuform with hotswap function, will there have some problems which can kill my board? And when comparing handwired and hotswap. which is easier to do if i'm a beginner? And another question: is reset buttons neccessary for this build? (because i saw many guides are always including this component)
@dactylmanuform
@lemmy.world