I ran zoneminder for years, and while it worked, I never much liked how much of a pain it was to set up. I've since moved to frigate, which is better suited to run in docker. If you know how to connect to the cameras with VLC, that should be the same info you need to configure frigate. If you have a 6th gen or newer (iirc) Intel cpu with a built in GPU, that will run the object detection portion of frigate just fine in my experience as well.
One downside in frigate i miss from zoneminder/zmninja is having all cameras live streaming from the main feed, frigate just gives you a snapshot in that view. They do have the Birdseye view that shows all motion in real time though.
I used the paper plans from Chesapeake light craft, and was able to source most of the supplies locally. It's built from marine grade plywood, 4 mil thick, traced off the paper plans and cut out with a jig saw. It's then "stitched" together with copper wire and "glued" together with epoxy resin and the whole thing covered in fiberglass. That's an over simplification of the process, but it's really not too bad, just time consuming. Took me close to 6 months of nights and weekends off and on, probably about $800 all in.
If you have a free pcie 4x or higher slot, you can throw in a cheap card to adapt to m.2 nvme, like 12 bucks. I'm running one in my older hp desktop that doesn't have m.2 and it's been working great.
For a quick test you could set it to 777, if that fixes it, check which user new files are being assigned to, adjust permissions back down accordingly.
We need more info on your permissions. 755 would mean anyone can read files there, but only the owner can write. If the owner isn't the same user that mediawiki is running as, then uploads won't work.
I have no way to test this with the equipment I have, but what about opnsense on an x86-64 box and throw an sfp+ pcie card in there. You could then in theory turn off auto negotiation and set it to 2.5g. Has anyone out there tried this?
I've been running opnsense with my CenturyLink 1g setup, though I'm still using their ont to convert to copper, and been very happy with it.
I'm pretty sure sensi thermostats, when controlled by home assistant, do what you want. I haven't confirmed they don't still try to phone home, but that could be dealt with by some firewall rules. Other thermostats that support homekit should also work.
I do almost exactly the same, except I have opnsense running on a cheap dual nic mini PC so I don't have that dependency on my proxmox servers. The unifi stuff does need a controller, but they publish a free app that you can run instead of getting their hardware.
We had two of these that ended up sitting in my desk at work back around that time. They were sent to us free with hopes we would port our (shitty) android/iOS apps to it. One was a bit newer, but they both just felt shitty compared to the equivalent Nexus or iPhone of the time, so I never bothered trying to use it as a daily driver. I wasn't even on the app dev team, no one else wanted them or cared at all. Was fun as a technical curiosity though.
@ostsjoe
@lemmy.world